Products
Experience The Best World-Class Comprehensive Energy Service Provider
SIVACON 8PT Intelligent Low-Voltage Power Distribution Solution
SIVACON 8PT is Siemens-licensed low-voltage switchgear, type-tested to IEC 61439 and verified by internal-arc testing. Its modular design supports both fixed and draw-out constructions. The Intelligent 8PT digital solution connects to the MindSphere cloud for power metering, monitoring and predictive maintenance, and is widely used in industry, buildings, data centers and rail transit.
SIVACON 8PT Intelligent Low-Voltage Power Distribution Solution.pdf
Product Details
SIVACON 8PT is Siemens-licensed low-voltage switchgear, type-tested to IEC 61439 and verified by internal-arc testing. Its modular design supports both fixed and draw-out constructions. The Intelligent 8PT digital solution connects to the MindSphere cloud for power metering, monitoring and predictive maintenance, and is widely used in industry, buildings, data centers and rail transit.
Main Functions
• Low-voltage power distribution for incoming, outgoing, bus-coupler, power-factor correction and motor-control circuits, using air circuit-breakers, moulded-case breakers and contactors
• Short-circuit and overload protection, plus motor starting and protection
• Intelligent 8PT functions: electrical-parameter acquisition, online power-quality monitoring, fault alarm and diagnosis, big-data energy analysis, equipment operating reports and predictive maintenance, managed locally or via MindSphere
• Supports top/bottom cable entry with front/rear connection and wall-mounted or free-standing installation
Usage Scope & Notes
Usage scope: indoor low-voltage power distribution.
• This is a type-tested assembly; component selection and cabinet modifications must remain within the type-tested scope.
• A corresponding gateway and software are required for communication; MindSphere needs account and license configuration.
• Internal-arc safety relies on the original cabinet structure, hinges, door locks and arc-relief channel; key structural parts must not be replaced arbitrarily.
• The cable-entry mode and installation type shall be confirmed early in the project; the installation floor shall be kept level.
Manufacturing
Two frame constructions — screw-assembled and welded — with 2.5 mm frame plates and 2.0 mm enclosure plates on a 25 mm modular hole pitch. Surface finishes are galvanized, aluminium-zinc coated or powder-coated. The full set of type tests to IEC 61439-1/-2 covers temperature rise, dielectric strength, short-circuit strength, protective-earthing continuity, IP protection and mechanical operation. The factory acceptance test covers visual inspection, wiring checks, dielectric testing and protective-circuit continuity. Manufactured under a DIN EN ISO 9001 quality-management system.
Technical Specifications
|
Standards |
IEC 61439-1/-2; IEC 61641 internal-arc test |
Internal Separation |
up to Form 4b |
|
Single Horizontal Busbar |
up to 5000 A |
Double-set Horizontal Busbar |
up to 7400 A |
|
Protection |
IP30 to IP54 |
Frame |
screw-assembled or welded; 25 mm modular hole pitch |
|
Protocols |
PROFINET, PROFIBUS, Modbus RTU |
Cloud Platform |
MindSphere (MindConnect gateway) |
Cabinet Types
|
FCB1 |
One air circuit-breaker, high-current incoming/outgoing up to 6300 A |
|
FCB2 / FCB2BC |
Two air circuit-breakers, 2000 A / 2500 A (upper unit can serve as bus-coupler) |
|
FCB3 |
Three air circuit-breakers, up to 1600 A |
|
OFW |
Draw-out cabinet, 1/2-drawer functional units, max. 100 A |
|
OFF |
Fixed-partition cabinet, supports 1/2 fixed partitions |
|
PFC |
Power-factor correction, non-detuned up to 500 kvar, detuned up to 350 kvar |
|
CCS |
Custom-design cabinet, 3-pole/4-pole busbar, rated current up to 1200 A |
Key Features
SAFETY & RELIABILITYVerified to IEC 61439 and the IEC 61641 internal-arc test; a patented arc-relief channel, imported explosion-proof hinges and door locks, and a structure proven against seismic and mechanical shock.
MODULAR STRUCTUREDevice compartment, horizontal wiring compartment, horizontal busbar compartment and cable connection compartment; internal separation up to Form 4b; wall-mounted or free-standing; top/bottom cable entry with front/rear connection.
BUSBAR SYSTEMA single horizontal busbar rated up to 5000 A and a double-set horizontal busbar up to 7400 A; the busbar compartment is separated from the device compartment by an arc barrier.
DIVERSE CABINET VARIANTSFCB1: one air circuit-breaker for high-current incoming/outgoing feeders up to 6300 A; FCB2/FCB2BC: two air circuit-breakers, 2000 A/2500 A (the upper unit can serve as a bus-coupler); FCB3: three air circuit-breakers up to 1600 A; OFW draw-out cabinet with 1/2-drawer units, max. 100 A; OFF fixed-partition cabinet; PFC power-factor correction cabinet up to 500 kvar (detuned 350 kvar); CCS custom-design cabinet up to 1200 A.
INTELLIGENT DIGITAL FEATURESA dedicated secondary-wiring compartment at the top front shields against EMI; drawer secondary connectors have a dedicated communication port; protocols PROFINET, PROFIBUS and Modbus RTU; compatible with the open MindSphere industrial cloud; integrated temperature and smoke sensors; SENTRON powermanager monitoring software and SENTRON powerconfig unified parameterization interface.
ENGINEERING TOOLSIMARIS configuration: engineering design software, a quotation system, and integrated technical manuals, assembly instructions and test reports.
Typical Solution
Product Parameters
Product Advantages
• Fully type-tested to the IEC 61439 series and the IEC 61641 internal-arc standard; a patented arc-relief channel with high-strength hinges and door locks gives a high level of personnel and equipment safety.
• A complete modular range covering high-current ACB circuits, draw-out feeders, fixed partitions, power-factor correction and custom cabinets for various distribution topologies.
• High busbar capacity: a single set up to 5000 A and a double set up to 7400 A, with separation grades up to Form 4b.
• Native digital hardware architecture with a shielded secondary compartment and drawer communication connectors; seamless integration with Siemens Totally Integrated Automation (TIA), Totally Integrated Power (TIP) and MindSphere for remote monitoring, early fault alarms, energy analysis and predictive maintenance.
• 1/2-drawer technology raises packing density and cuts capital cost; draw-out units offer connected, test and disconnected positions.
• The SIMARIS configuration engineering tool integrates design, quotation and assembly documentation to shorten lead time.
• Two frame constructions — screw-assembled or welded profile frames; surface finishes of galvanized, aluminium-zinc coated or powder-coated steel; protection from IP30 to IP54.
Components, Accessories & Packaging
• Main primary components: 3WL/3WT air circuit-breakers; 3VA/3VL/3VT moulded-case circuit-breakers; 3RV motor-protection circuit-breakers; 3RT contactors; 3RU/3RB overload relays; 3RW soft-starters; SIMOCODE pro intelligent motor-management system.
• Digital components: MindConnect MindSphere cloud gateway; SENTRON multi-function meter; SENTRON powermanager power-monitoring software; SENTRON powerconfig parameterization software; SCALANCE Ethernet switch; temperature and smoke sensor modules.
• Cabinet accessories: explosion-proof hinges and door locks, patented top-mounted arc-relief channel; primary and secondary connectors for 1/2-drawer units; inter-cabinet partitions; modular mounting accessories.
• Engineering tool: SIMARIS configuration software.
Packaging: factory protective packaging; cabinet splicing, earthing and base fixing are completed on site.
Certifications
Full set of type tests to IEC 61439-1/-2 and the IEC 61641 internal-arc test; third-party certification such as TÜV; compliant with the DIN EN ISO 9001 quality-management system.
RELATED PRODUCTS
Find Solutions, Not Just Suppliers
If you are interested in any of our products or would like to make your customized order, please feel free to contact us. We are looking forward to establish successful business relations with you.
Discover More