Products
Experience The Best World-Class Comprehensive Energy Service Provider
KE-5100 MW-Class Liquid-Cooled Battery Energy Storage Container
Ideal for a wide range of applications: utility-scale renewable energy integration, standalone energy storage plants, grid peak shaving and frequency regulation, commercial & industrial (C&I) parks, and PV-storage-EV-charging integrated stations.
KE-5100 MW-Class Liquid-Cooled Battery Energy Storage Container.pdf
Product Details
Ideal for a wide range of applications: utility-scale renewable energy integration, standalone energy storage plants, grid peak shaving and frequency regulation, commercial & industrial (C&I) parks, and PV-storage-EV-charging integrated stations.
Technical Specifications
|
Model |
KE-5100 MW-Class |
System available energy |
2.51/5.02 MWh |
|
Nominal voltage |
1331.2 V (operating range: 1164.8–1456 V) |
Nominal power |
2.5 MW |
|
Rated charge/discharge rate |
≤ 0.5C |
Battery module configuration |
12 × 1P416S |
Applications
Ideal for a wide range of applications: utility-scale renewable energy integration, standalone energy storage plants, grid peak shaving and frequency regulation, commercial & industrial (C&I) parks, and PV-storage-EV-charging integrated stations.
Scope of Use and Precautions
Applicable range:
Operating temperature: −20 °C to 55 °C; Operating altitude: ≤ 5000 m (with derating from 3000–5000 m); Relative humidity: 0–100 %; Corrosion protection class: C4 (C5 optional).
Key Features
ULTIMATE SAFETYPhysical isolation between electrical and battery compartments; three-level fire protection plus pack-level fire suppression;- Stable operation in extreme conditions, including wide temperature ranges and high altitude;- IP55 protection rating for the entire unit, certified to multiple international standards.
HIGHER EFFICIENCYCTP (cell-to-pack) technology significantly improves energy density, saving over 20 % of floor space versus traditional solutions;- Fully in-house developed BMS/EMS/PCS for millisecond-level coordinated response;- Standard 20-ft container, fully integrated and factory-assembled for quick on-site deployment and commissioning.
LONGER LIFESPANHigh-stability LFP cells with intelligent BMS active balancing technology, delivering a cycle life of ≥ 8,000 cycles;- Intelligent liquid-cooling thermal management system keeps cell temperature difference within the cluster below 3 °C, safeguarding cell consistency;- Adaptive expansion-force design, pack-level IP67 rating, long-term reliability under daily cycling.
GREATER FLEXIBILITYSeamless capacity expansion from 1.25 MWh to 800 MWh, supporting grid-connected, off-grid, microgrid and VPP operation modes;- 0.5C rate, adaptable to 2h/3h/4h duration configurations;- Supports side-by-side and back-to-back installation; corrosion protection class C4 (C5 optional), suitable for coastal and industrial environments.
Typical Solution
Product Parameters
SYSTEM OVERALL PARAMETERS
|
Battery module configuration |
12 × 1P416S |
|
System available energy |
2.51/5.02 MWh |
|
Nominal voltage |
1331.2 V (operating range: 1164.8–1456 V) |
|
Max. voltage range |
1164.8–1456 V |
|
Nominal power |
2.5 MW |
|
Rated charge/discharge rate |
≤ 0.5C |
CELL PARAMETERS
|
Cell Type |
LFP |
|
Rated capacity |
314 Ah |
|
Nominal energy |
1004.8 Wh |
|
Nominal voltage |
3.2 V |
|
Cycle life |
≥ 8,000 cycles (25 °C, 0.5C, 70 % EOL) |
|
Battery Module Configuration |
1P104S |
BATTERY PACK PARAMETERS
|
Nominal energy |
104.5 kWh |
|
Nominal voltage |
332.8 V |
BATTERY CLUSTER PARAMETERS
|
Battery Module Configuration |
1P416S |
|
Number of Battery Modules |
4 |
|
Nominal energy |
418.0 kWh |
|
Nominal voltage |
1331.2 V |
ENVIRONMENTAL PARAMETERS
|
Operating temperature |
−20 °C to 55 °C |
|
Operating altitude |
≤ 5000 m (with derating from 3000–5000 m) |
|
Relative humidity |
0–100 % |
|
Corrosion protection class |
C4 (C5 optional) |
STRUCTURE & SAFETY PARAMETERS
|
Mass |
< 45 t |
|
Thermal Management Type |
Intelligent liquid cooling |
|
IP rating |
IP55 |
|
Fire Suppression Type |
Three-level fire protection (PACK-level + cluster-level + cabinet-level) + pack-level fire suppression (optional) |
|
Communication Interface |
RS-485, CAN, Ethernet |
|
Dimensions (L × W × H) |
6058 × 2438 × 2896 mm |
|
Certifications |
IEC 62619, IEC 63056, IEC 62477, IEC 61000, RoHS, etc. |
* All parameters listed above are based on the 5.02 MWh model. For specifications of other energy capacities (2.51 MWh), please refer to the respective model datasheets.
Certifications:
IEC 62619, IEC 63056, IEC 62477, IEC 61000, RoHS, etc.
RELATED PRODUCTS
Find Solutions, Not Just Suppliers
If you are interested in any of our products or would like to make your customized order, please feel free to contact us. We are looking forward to establish successful business relations with you.
Discover More