Products

Experience The Best World-Class Comprehensive Energy Service Provider

Home - Products - Smart Grid - Prefabricated Substation -

YZB(C)-Prefabricated Substation (Prefabricated Cabin)

YZB(C)-Prefabricated Substation (Prefabricated Cabin)

Share:

The product provides plug-and-play, customized power supply solutions covering all aspects from preliminary planning and engineering design to installation and commissioning guidance, and can quickly and flexibly support reliable power supply for any power-consumption occasion. It can be applied to almost any field and can be designed as a mobile modular unit according to on-site needs and placed at will.

Product Details

Product Overview

The YZB(C)-Prefabricated Substation (Prefabricated Cabin), also known as the power container E-House, is developed in line with the modular construction concept of smart substations, following the principle of coordinated unity of "safety, applicability, versatility and economy" and the approach of "standardized design, factory processing and prefabricated construction", combined with standardized construction practices such as the general-design "two-type one-ization" and full life-cycle design.

The product provides plug-and-play, customized power supply solutions covering all aspects from preliminary planning and engineering design to installation and commissioning guidance, and can quickly and flexibly support reliable power supply for any power-consumption occasion. It can be applied to almost any field and can be designed as a mobile modular unit according to on-site needs and placed at will.

Internally, the prefabricated cabin integrates 110 kV or 220 kV high-voltage distribution units, 10 kV or 35 kV medium-voltage distribution units, transformers, 0.4 kV low-voltage distribution units, generator emergency access units, comprehensive automation monitoring and protection units, and diesel generator parallel units, together with supporting auxiliary subsystems including a power-environment monitoring system, a fire protection system and a security system.

With a compact structural layout, flexible transfer and strong mobility, the product offers convenient on-site construction, rapid commissioning and high power supply reliability. The performance of the product meets relevant national standards.

 

Applications

The product is widely used in smart modular substations, data center power pipe galleries, new energy power generation industries, offshore platform power cabins, oil and gas drilling skid-mounted platforms, rail transit traction power and energy storage power stations, and can be applied to almost any field where reliable power supply is required. It may be designed as a mobile modular unit according to on-site needs and placed at will.

 

Main Functions & Configuration

The prefabricated cabin integrates the following primary equipment units and auxiliary subsystems as a complete power supply system:

 

Table 1  Integrated units and auxiliary subsystems

 

Unit / Subsystem Configuration (per customer data)

High-voltage distribution unit

110 kV or 220 kV

Medium-voltage distribution unit

10 kV or 35 kV

Transformer

Integrated

Low-voltage distribution unit

0.4 kV

Generator emergency access unit

Integrated

Comprehensive automation monitoring and protection unit

Integrated

Diesel generator parallel unit

Integrated

Power-environment monitoring system

Integrated

Fire protection system

Integrated

Security system

Integrated

Technical Specifications

Enclosure (Cabin) Specifications

Table 2  Cabin main technical indicators and parameters

 

Parameter Specification

Protection rating

Not less than IP55

Cabin fire resistance limit

Not less than 1.5 h

Ground live load

8 kN/m²

Non-accessible roof live load

0.5 kN/m²

Maximum snow pressure

Can meet the local snow-load value

Anti-corrosion requirements

Effective anti-corrosion measures adopted according to the use-site environment

Target internal temperature

10 °C–30 °C (unmanned); 18 °C–25 °C (manned)

Relative humidity in cabin

Not more than 75 %, no condensation under any circumstances

Air-conditioning noise in cabin

<55 dB

Cabin service life

Not less than 40 years

 

Primary Equipment Rated Values

Table 3  Primary equipment rated values

 

Rated value Value

Rated voltage

≤126 kV

Rated current

≤4000 A

Rated short-circuit breaking current

≤40 kA

Rated frequency

50 Hz

 

Secondary Equipment Rated Values

Table 4  Secondary equipment rated values

 

Rated value Value

Rated AC voltage

AC 220 V

Rated DC voltage

DC 110 V/220 V

UPS voltage

AC 220 V

Rated frequency

50 Hz

 

Manufacturing & Construction Features

 

Cabin body. The prefabricated cabin body adopts a three-layer metal structure with "refrigerator-type" insulation measures and technology: double-layer high-quality steel plates, with polyurethane fireproof insulation material (permitted by the Ministry of Construction) as the internal filler to ensure the insulation and fireproof performance of the whole cabin, plus an environmentally friendly metal decoration layer. The door panel thickness is not less than 50 mm, ensuring the "24-wall" insulation effect.

 

Cabin doors. The cabin door panels adopt "broken-bridge heat insulation" technology. The inner door panel is in a suspended state (point contact) relative to the outer door panel, with a minimum gap of not less than 3 mm. Flame-retardant foam material (polyurethane) with a density of 37 kg/m² is filled between the inner and outer door panels, reducing the thermal conductivity of the inner and outer door panels to 2 %.

 

Interior decoration. The interior wall is preferably rock-wool composite board, and the interior decoration surface is pure white (special colour requirements per the drawing description). The decorative wall surface is flat and neat, with tidy seams and no scratches, nail caps or glue stains, and the gap is not more than 2 mm. Component installation is seamless with no exposed wires. The suspended ceiling in the cabin adopts aluminium-plastic board, sandwich board or decorative rock-wool board, with small seams, flat and beautiful, non-combustible and strongly hydrophobic; Class A fire resistance is preferred, and not less than Class B flame retardancy.

 

Floor. The cabin bottom plate adopts patterned steel plate or epoxy-resin partition with a thickness of not less than 4 mm and a splicing gap of ≤2 mm. When any 0.3 m × 0.3 m range is subjected to a uniform static load of 200 kg, the floor deflection is ≤5 mm.

 

Appearance. The cabin surface is smooth, without cracks, scars, delamination or burrs, and the colour is uniform. The facade is usually in the form of corrugated board and the top is flat steel plate; the whole is white (colour standard RAL 9010), with the enterprise LOGO partially sprayed and the cabin function name printed in the middle of the facade. A black reflective mark is set at the facade plinth (height according to the height of the lower channel steel). Invisible ladders can be added as needed to facilitate climbing to the top of the cabin. Where organized drainage is adopted, downpipes are designed at the four corners. The joints of each combined module are tightly spliced, flat and without exposed screws, adopting a nested waterproof design; the gaps are sealed with special high-weather-resistance glue, which is beautiful and ensures the same protection and anti-corrosion level as other parts of the cabin. The appearance of the switchgear and screen cabinets inside the cabin is uniform, and the position, font and height of the switchgear, screen cabinet and manufacturer name markings are consistent.

Typical Solution

Smart Distribution Network Solution

Smart Distribution Network Solution

This solution is designed directly for power users and is closely related to production and daily life. It is suitable for medium- and low-voltage distribution networks, including overhead and cable lines. Working together with the distribution master station, it enables real-time monitoring of the power distribution network, fast fault location, isolation, and restoration of power to non-fault areas.

Smart Substation Product Solution

Smart Substation Product Solution

Utilizes a dual 32-bit high-speed CPU multi-processor architecture and an embedded real-time operating system. A reliable startup mechanism enhances fault sensitivity and enables cross-platform and cross-hardware applications.

Smart Integrated Electricity Utilization System Solution

Smart Integrated Electricity Utilization System Solution

Designed with an open interface and compliant with domestic and international technical standards, the system provides an integrated solution for various users, including grid-connected users, substations, high/low-voltage commercial and industrial users, low-voltage residential users, and property/community energy management users. It aims to address challenges such as fluctuating power supply and demand, difficulty in electricity fee collection, high bad-debt risks, and their impact on the economic efficiency of power supply enterprises. The system enables remote meter reading, electricity sales management, property management, energy consumption monitoring, power quality analysis, smart line monitoring, and free interaction of electricity information. It offers flexible, efficient, accurate, and user-friendly technical features, providing abundant, timely and reliable data for energy market analysis.

Smart Power Distribution System Solution

Smart Power Distribution System Solution

As an integrated primary & secondary power distribution solution, it features advanced technology, flexible configuration, high efficiency and intelligence. It fully meets the requirements of intelligent power distribution from 0.4kV to 40.5kV, supporting smart and eco-friendly urban development and providing reliable support for smart grid construction.

PV-Storage-Charging Smart Microgrid Solution

PV-Storage-Charging Smart Microgrid Solution

Drawing on nearly two decades of expertise in power system technology, we integrate PV inverter, power protection, communication and internet technologies to deliver full-lifecycle integrated solutions for distributed PV power stations, including utility-scale and energy storage PV power stations.

EV Charging Total Solution

EV Charging Total Solution

A complete EV charging solution comprising smart charging equipment, cloud platform and mini-program, covering AC and DC chargers, operation platform and customized mini-program development.

Power Engineering System Integration Solution (EPC)

Power Engineering System Integration Solution (EPC)

Kelin Power Engineering EPC leverages the brand, technology, capital and market advantages of Kelin Electric. Focused on power engineering construction, we have established a full lifecycle service model of "Design + Procurement + Construction", striving to deliver premium projects in the power industry.

Smart Energy Management & Control Platform

Smart Energy Management & Control Platform

Focused on integrated energy management, and drawing on extensive power system experience combined with the company's full product range, we provide premium integrated energy management and control solutions for enterprise parks, residential communities and urban complexes based on Internet thinking.

Product Parameters

Service Conditions (Environment & Installation)

 

Altitude

4000 m and below

Ambient temperature

−40 °C ~ +45 °C

Wind speed

Not exceeding 35 m/s

Air relative humidity

Daily average not exceeding 95 % (+25 °C)

Seismic horizontal acceleration

Not greater than 0.4 m/s²

Seismic vertical acceleration

Not greater than 0.2 m/s²

 

Installation site. There should be no conductive dust or corrosive, flammable or explosive dangerous items harmful to metals and insulation, and no severe vibration at the installation site. The seismic intensity shall not exceed 8 degrees, and the vertical inclination shall not be greater than 5 degrees.

Snow load. 0.25 kN/m².

If the normal use conditions above cannot be met, arrangements can be negotiated with the manufacturer.

 

Standards & Compliance

The performance of the product meets relevant national standards.

 

Quality & Service

The product is supplied with plug-and-play, customized power supply solutions covering all aspects from preliminary planning and engineering design to installation and commissioning guidance, so as to support fast, reliable power supply at any power-consumption occasion.

RELATED PRODUCTS

Find Solutions, Not Just Suppliers

If you are interested in any of our products or would like to make your customized order, please feel free to contact us. We are looking forward to establish successful business relations with you.

Discover More